Fast-Way Batch Plant
The Fast-Way batch plant has many changes. We now offer a 6-yard plant and an 11-yard plant. Each is capable of being towed by a 3/4-ton pickup.
We have changed the 24″ conveyor belt to an all-rubber belt including the side wall and flights. This enables materials to be conveyed faster and quieter in addition to eliminating spill-over from the conveyor belt.
The scale system is a 4-cell/40,000 lb. electronic system with a 3-inch digital indicator that pivots 180 degrees out providing a clear view of the scale to the loader operator.
This Fast-Way aggregate batch plant can be ready to produce concrete minutes after it reaches the job site!
Fast-Way Si-Low 206 & Si-Low 210 Hydraulic and Mechanical
The Fast-Way portable SI-LOW 206 and SI-LOW 210 are the fastest ways to hit the ground running. Designed to comply with legal height and width towing boundaries, the SI-LOW 206 and SI-LOW 210 can be towed with a one-ton pickup.
For the process of filling a fleet of volumetric trucks, the SI-LOW 206 or SI-LOW 210 is ready to perform as a portable fill station. The SI-LOW 206 stores 200 barrels of cement and discharges the cement with a 6″ auger which produces 500 to 600 pounds per minute. The SI-LOW 210 also stores 200 barrels of cement, but has the advantage of increasing cement discharge with a 10″ auger that produces 3,000 pounds per minute.
Fast-Way Mobile Cement Silo 5
This is the Fast-Way to produce concrete. Whether you need to set up on a small job or stationary site, the Fast-Way silo is the answer.
The Fast-Way 275 barrel mobile silo is self-contained. It is specially equipped with a special designed trailer and hydraulic system, which allows the silo to lie down during transport. Once at the job site, the self-contained hydraulic system will erect the silo without crane assistance. After the silo has been erected the trailer can be disconnected by removing a few bolts and unhooking four hydraulic quick couplers.
Towing the cement silo at highway speeds can be done easily with a one-ton pickup. Since the silo and trailer fall within the legal length and width boundaries, no oversize permits are required to tow them. In addition to transport, the silo and trailer come completely equipped with trailer brakes, tail lights, stop lights and signal lights.
Since all the components stay intact while in transport, there is no major installation on the job site. Once the silo is on location, the silo is self-contained with a gas-engine powered hydraulic system. This system eliminates the need for electricity to erect your silo. You are now ready to produce concrete the Fast-Way!
Fast-Way Silo 275H 6 & 10
Silo 275 Specifications
- Silo: 1175 cu. ft = 275 barrel
- Hydraulic Screw: 6″ or 10″ hydraulic screw
- 4″ dia. Pneumatic Fill Line
- 4 aerator pads
- Discharge Height: 13′ 4″
- 18 bag collector (Baghouse)
- Continuous ladder with containment hoops, handrail around the top, sight port and man access.
- Trailer Chassis: Electric Brakes, Tail, Stop and Clearance Lights
Optional Equipment (At Additional Cost)
- Hydraulic drive: Electric, diesel, or gasoline motor
Travel Dimensions and Data
- Overall Height Erected: 42′
- Travel Length: 42′
- Width: 8′ 6″
- Height: 13′ 4″
- Road Clearance: 12″
- **PRINTLE HITCH REQUIRED**
- Weight at Hitch: 1600 lbs.
- Shipping Weight: 11,500 lbs.
- Shipping Volume: 4,832 cu. ft.
The heavy duty Fast-Way Cement Auger with bag breaker (when bulk cement is not available) and a small pour is required, can be used with 94# cement bags. It can be used with the Fast-Way batch plant, and can be equipped with electric motor, gas engine or diesel motor.
For contractors on the move, control your contracts without a large investment. Produce concrete at any location. Here’s all you need: a Fast-Way Batch Plant, a Fast-Way Cement Auger, a mixer truck and a loader.
The cement auger tube is quickly raised from the tow position by the hand winch. After inserting the mast safety pin, the auger is ready for production.
Fast-Way Super Sacker
This plant makes a compact job site installation with a small footprint. It is ready to go to work in just minutes. The set up is cost-efficient and a crane is not required.
The individual scale system implanted in the Fast-Way Batch Plant and Super-Sacker enables the operator to produce an accurate batch each and every time.